i might be falling in the Big L with that mutron knockoff.
it does wonders for the Bass3.
just so you know.
23.8.10
19.8.10
Bow Wow
I finished the Gristlizer Prototype.
put it in a box for Jelle to try out.
although i had to tell him i'm not fully satisfied with it yet - the Fet i used might not be up to it, or maybe it's inherent to the design, but in certain knob positions you hear the LFO bleeding through more than i would like. mostly w/ Ramp Up and Square - seems the steep falling edge is responsible.
Will do just fine for industrial type processing - both throbbing and gristleing - but i will definitely have to come back to it later. I'm a perfectionist and perfect is a skinned knee, apparently.
So i started repairs on that Melos Effectmatic box. it used to crackle like hell, and it was unresponsive in certain settings (if not all.)
It has now officially been fixed by getting a certain out-of-whack voltage divider up on its feet again.
thing is, now it's lying here open and unscrewed and with its guts bare: i feel this one has room for improvement as well.. Oww boii. blend? sensitivity control? master volume? wider range? hmm.
if i can find my capital M, the Modding can begin.
24.7.10
the Hohner Bass Threemörk, pt.XI: You Must Be Kidding
no really. all the electronics are in place, the switching jacks are wired as inserts for easy effects hookup - and all of it sounds, well, "pretty ok" (notice the quotation marks) to my ears.
So, on the menu for tonight: first public performance in a 7-headed improv session @ Fort 8 in Hoboken, Belgium. Granted, not quite the Place one would associate with Space, still.. looking forward to it. See you there.
So, on the menu for tonight: first public performance in a 7-headed improv session @ Fort 8 in Hoboken, Belgium. Granted, not quite the Place one would associate with Space, still.. looking forward to it. See you there.
14.7.10
the Hohner Bass Threemörk, pt.X: Ponderings
the outside of the case looking pristine will not stop me from altering its insides.
while that goes for any make pedals, synths, toaster ovens, and basically anything else i get my hands on, it seems to be especially true for this unfinishable piece of kit. was that a word? is now.
i put in switching jacks for each voice (A, Arp., B) so as to be able to route them each to external effects. problem is, with the crude passive mixing i used, the volume on the master fluctuates with patching. you want the Arpeggiator going to a delay? possible. however, voice A and B will be louder on the master all of a sudden.
not my idea of fun.
so i'm going in for buffer overkill.
(yeah, i know, not my idea of fun either, but that's what happens when you don't really know what you're doing - piecing everything together one step at a time. so sue me.)
and since turning back - like turning down - is not an option, i breadboarded a little.
seems it will work out, in the end. yay.
upon which i tried a cheesy envelope filter on the Arpeggiator.
lo and behold: it started to sound like a Real Synth.
i hate envelope filters on guitar, but all of a sudden they do seem interesting.. should have an old Melos effectmatic (one of many mu-tron III adaptations) lying around here somewhere that's in need of repair. Up two steps on that ol' priority list..
9.7.10
the Hohner Bass Threemörk, pt.VIII
did i say 'and after that.. we're done?'
ah, the folly of youth.
it's never over.
the extra gapper oscillator - or MCO, as in Manually Controlled Oscillator. yes, i actually think that's funny -
got its range switch, selecting between three speeds, with an octave (more or lessy) between them.
Chopper to BabyWantsCandy high whine. yay.
plus, i added another switch to choose its destination: the arpeggiator section, running the gapper, or the voice A filters. got its own volume control for that one, determining the submix to voice A.
Since the gapping consist of switching to 4 empty (thus silent) inputs on the Mux, i went ahead and wired them together to a jack. So now i basically have an option to run external audio through the arp section, filling the gaps, alternating with the synth sound. tried it with a heavily distorted guitar and results were funghi sweet.
(heavily distorted since the input needs a dedicated preamp, actually, but that's not there yet. Did i mention it's never over?)
Turning the 4 octave knobs all the way down gives you a squarewave tremolo on the external, with an option of running the MCO gapper as well. Dual trem. Pretty nifty. Do people still use that word, nifty?
Well then, on to the outside of the thing.. aka the Looks.
i picked up a thrift store suitcase with the exact dimensions of the keyboard.
due to my Add On and Pile Up approach, i ended up with a gazillion little subboards that all needed to sit snugly in there.
so far, no problems. loads of wiring though.
ditched the layout testing cardboard for some nice wood panelling, cut ridiculously exact to specs with the help of mr. Zeichnungsfreistelle himself.
drilled pretty clean to photoshop drilling template, so as to stop myself from making further additions: man needs to know his limits, and i'm way beyond them already anyway.
I still need to order me some nice knobs, right now i'm making do with whatever i had lying around.
Was thinking of screenprinting the faceplate, but that would make it Xmas by the time i get finished so i decided against it.
So right now i'm actually in the process of cleaning up the wiring, which sounds pretty final to me.
now for that external audio preamp..
ah, the folly of youth.
it's never over.
the extra gapper oscillator - or MCO, as in Manually Controlled Oscillator. yes, i actually think that's funny -
got its range switch, selecting between three speeds, with an octave (more or lessy) between them.
Chopper to BabyWantsCandy high whine. yay.
plus, i added another switch to choose its destination: the arpeggiator section, running the gapper, or the voice A filters. got its own volume control for that one, determining the submix to voice A.
Since the gapping consist of switching to 4 empty (thus silent) inputs on the Mux, i went ahead and wired them together to a jack. So now i basically have an option to run external audio through the arp section, filling the gaps, alternating with the synth sound. tried it with a heavily distorted guitar and results were funghi sweet.
(heavily distorted since the input needs a dedicated preamp, actually, but that's not there yet. Did i mention it's never over?)
Turning the 4 octave knobs all the way down gives you a squarewave tremolo on the external, with an option of running the MCO gapper as well. Dual trem. Pretty nifty. Do people still use that word, nifty?
Well then, on to the outside of the thing.. aka the Looks.
i picked up a thrift store suitcase with the exact dimensions of the keyboard.
due to my Add On and Pile Up approach, i ended up with a gazillion little subboards that all needed to sit snugly in there.
so far, no problems. loads of wiring though.
ditched the layout testing cardboard for some nice wood panelling, cut ridiculously exact to specs with the help of mr. Zeichnungsfreistelle himself.
drilled pretty clean to photoshop drilling template, so as to stop myself from making further additions: man needs to know his limits, and i'm way beyond them already anyway.
I still need to order me some nice knobs, right now i'm making do with whatever i had lying around.
Was thinking of screenprinting the faceplate, but that would make it Xmas by the time i get finished so i decided against it.
So right now i'm actually in the process of cleaning up the wiring, which sounds pretty final to me.
now for that external audio preamp..
4.6.10
the Hohner Bass Threemörk, pt.VII
Tried the Q control on the filters.
For the tech savvy: varying the emitter R on the filters. i love you guys.
well, as far as Theory goes, it worked - but then theory only goes so far.
So no, not even close to the 'Keep It, Wire It' section.
results on the Tuba filter were boring, so that one's standard issue still.
slightly better on the String filter, but there was another R where variation was more interesting -
the 100K from buffer out to filter in got a parallel 500K pot.
changing F and Q at the same time, for more of a 'Sweepy' feel, if that means anything.
changing the Q (varying Re) together with that sweep gave a slightly larger range, but it wasn't worth an extra pot -
it was just making things more complicated, more than anything else.
last thing i'm wondering is if i should hook LFO II (the ring mod gapper driver - terminology inc., get in touch)
to the audio output in some way. seems like a waste to have an oscillator running in the audio range and not hear it ;)
and after that - we're done!
For the tech savvy: varying the emitter R on the filters. i love you guys.
well, as far as Theory goes, it worked - but then theory only goes so far.
So no, not even close to the 'Keep It, Wire It' section.
results on the Tuba filter were boring, so that one's standard issue still.
slightly better on the String filter, but there was another R where variation was more interesting -
the 100K from buffer out to filter in got a parallel 500K pot.
changing F and Q at the same time, for more of a 'Sweepy' feel, if that means anything.
changing the Q (varying Re) together with that sweep gave a slightly larger range, but it wasn't worth an extra pot -
it was just making things more complicated, more than anything else.
last thing i'm wondering is if i should hook LFO II (the ring mod gapper driver - terminology inc., get in touch)
to the audio output in some way. seems like a waste to have an oscillator running in the audio range and not hear it ;)
and after that - we're done!
Subscribe to:
Posts (Atom)
