6.8.14

EHX Small Stone Modding

just a quick writeup on my latest venture into modsville: the Small Stone.

on the wish-or-want-to-try-list:
- get the effect to be more subtle at the twist of a knob (aka mix),
- a depth control might be nice (as in: amplitude of phase sweep)
- fix volume drop when pedal is engaged.

i found some of the stuff i needed on the net, came across some stuff i didn't think i'd need but sounded interesting, and couldn't find info on the depth control.

so, here we go.
#1, the classic: univibing. swapping capacitors in the phasing stages to get the sound closer to a univibe. liked the effect, didn't care for the option of swapping each stage individually too much, so i ended up throwing in a 4PDT, moosapotamus-style.

#2, the mix.
i tried what a lot of people refer to as a 'depth' mod, which alters the ratio of the mixing resistors and throws in a pot for the occasion. it does go from clean to vibrato (don't really like it as a vibrato, but ok). problem with this is that as soon as you flip the Color switch, you send phased signal back to the input to create extra resonance - and while that's nice, it also means your clean signal is now no longer clean, rendering this approach to the depth/mix mod sort of useless. to me, that is.

i tried running the feedback path to the second phase stage (like the Ross Phaser), seeing how that would solve that issue, but i didn't like the sound as much. it's still a valid idea, i guess, if you're into that kind of sound.

now, i already modded another small stone with a buffer in front and a booster at the end to compensate for tone suck/volume drop, and i was going to redo that with this one.
so i figured i could lose the mixing stage of the original effect altogether, take the buffered signal as the clean end for a new mix control, and still have the extra resonance the color switch provides.
works beautifully, as it turns out. you do get a slight volume boost at both extremes (the phasing effect is in the middle of the rotation, and it's always going to cost you some volume - nature of the beast) but i don't really mind. not enough to want to fix it, anyway.

#3, speaking of that color switch:
i altered the resonance/feedback path slightly. took out that half of the color switch and basically replaced it with a pot. 500K sounds exactly the same as no feedback at all, 10K minimum stops it from squealing - and you get everything in between.

the second half of the color switch messes with the LFO, and alters both the depth (the LFO's amplitude) and the speed of the effect.
i swapped it out with a SPDT because it was easier to position than the original bulky russian 2PDT.
i put in an on/off/on switch because it was what i had lying around, but the difference between the off position and the regular mode is so subtle i wouldn't bother with it too much.
since i was still hoping to find a solution for the depth control, i thought about fixing it in the deepest (color 'on') mode and bringing it down afterwards, but it turns out it still sounds a little different. maybe it messes with the waveform (haven't scoped it), or it shifts the whole waveform up slightly, i don't know. anyway, decided to keep it, in spite of coming up with

#4, a way to control the LFO's amplitude.
i read up on OTA's a bit, and i learned they spit out current rather than voltage. what's more, they do so based on the difference in voltage between their two inputs, much like regular opamps. so i figured if i wanted to control the amount of current coming out, i might as well try to control that difference.
and yes, if you hook pin #2 to pin #3, rendering the difference 0, the lfo shuts down.
i went the crude way and hooked up a 100K pot between both inputs. at 100K, behaviour is the same as before. turning the resistance down, the amplitude drops and the phasing gets more shallow.
there is a certain point where the speed is affected as well, and the whole thing speeds up quite dramatically. i don't mind. it can probably be avoided by someone who knows what they're doing.

#5 fixing the volume drop:
as i said, i surrounded the small stone with a 4558 buffer/booster combo. standard stuff, really.
it seems it needs quite a bit more boost than before, probably because i skipped the input 2xtransistor stage of the effect and used the plain buffered guitar signal for the clean end of my mix.

#6 bright mod:
straight from the moosapotamus' mouth, i put in the 0.1uF instead of the 10uF.
didn't bother with a switch. i like my treble spanky, and i loved it as soon as i heard it.
really retains your original sound.


here's the schematic for my ramblings:



give it a go if you'd like.
let me know if it works for you.
oh, commercial modders: some cold hard credit would be nice if you feel like offering that depth thing.. wink wink, nudge nudge.

29.12.13

Pearl SY-1 mods explained


Alrighty .

i promised a more detailed explanation on the SY-1 mods i did. 
and since i just opened her up for some minor repairs and adjustments,
and since opening her up is a PITA,
now seems to be as good a time as any.

oh yeah - in NO WAY can, should or will i be held responsible for any damage this (or you) may do to your unit. or its resale value, for that matter.
capice? we cool.

* first off, the easy bit: the dual mono output.

looking at the schematic, channel 1 and channel 2 are added into a single mono signal using two 10K resistors, after the volume sliders. (they left out CH2's volume slider for clarity.)
so you can just lift a leg on CH2's 10K resistor and run an extra wire to the ring of the jack. the tip stays connected the way it was, using the original wiring.





A WORD OF WARNING: this does mean that the SY-1 is now configured for use with stereo (TRS) plugs.. when you plug a mono jack cord in there, you will only ever hear ONE CHANNEL. 
you'll be pulling CH2 to ground = no sound !
i found insert cables (stereo to 2x mono, you know the type) to be easiest, but ymmv.


* next up, the fun bit: CV control.

i did some modifications to what i had in this earlier post - and lo and behold, things just got simpler!
see, even with the added bonus of the service manual, i don't seem to be able to locate the 4.7K pulldown resistors - they're in the schematic, but they don't seem to be on the board.
(unless i really am missing something. if so, feel free to drop me a line.)
i blindly put in 5.6K's at the time - closest value layin' around - but since i doubt they were in there in the first place, and since they lowered the CV input's impedance quite a lot, i took them out.
well, the net result is far better range!! with some careful adjustment, i was able to get a very decent tracking of the full 5 octaves my MIDI to cv converter will give me. yay.

so, updated schematic:




for the record: i'm assuming you never want to be able to use the tune pedal again, just CV in.

now, originally, a fraction of the +9v from the tip got sent back in through the ring connection. therefore, we can use the ring for CV input.

BUT you'll want to lose the +9v connection first - just remove the 100R resistor. it makes it safer against accidentally plugging in mono jacks - which will happen eventually, trust me - and it frees up the tip for CV input use.




of course, for CV input, the easiest way is to plug a jack in halfway, thus using the ring of the tune pedal jack as is.
not exactly a stageproof method, though.

a better solution would be to run your CV on the tip instead of the ring.(*read on first.)
you'd need to do a tracecut on the pcb: cut the connection going from the ring to the brown wire (near the power jack). the brown wire takes the CV to the oscillators.
leave the ring floating, and connect the brown wire to the tip (duh.)

BUT
more importantly, you'll want to replace the original 47K resistors with a higher value to adjust tracking.
you can find them here:



right now, 120K gets me in the ballpark for a nice range of V/Oct control, but even though i have the service manual i still haven't gotten round to calibrating my unit yet - so that value might change after calibration.
a trimmer is definitely the better option here anyway, trust me.
now i guess you could put in two 250K precision trimmers and get it over with - but i went and took out those resistors, ran wires from the holes, added a 100K trimmer in series to each of the original 47K's, and mounted the lot on a piece of perfboard that fits right next to the jack PCB. (only real space left in there.)
that gives me the advantage of being able to adjust the trimmers more easily, as they're a bit more reachable, even though it still means disassembling the case.
damn, i wish i'd taken pictures of that piece of perf before closing her up again.



(*) now, if you're like me, you might want dual CV inputs for fully independent channels.
first off, dual inputs means using a split stereo cable for both tip and ring (see output jack mod), which means that you should leave that ring connection intact - no tracecuts needed. we will keep CV for CH2 on the ring input, so the channels correspond with the output jack.
you can go straight to replacing CH2's 47K resistor as per the above procedure.

the second input, tip to CH1, uses only one of the 47K's resistor holes.
run a wire from the jack tip (you did lose that 9v, right?) straight to the 47K+trimmer combo (or 250K trimmer, or whatever you came up with). the wire coming out of the trimmer should then go to the appropriate resistor hole, which is CH1's CV mixer line.
that would be the hole closest to the board's edge (CH1 resistor's left side in pic above.)

now hook up your CV keyboard, and turn the trimmer until you get a decent in-tunish response over a couple of octaves.

that's about it - proceed with caution and have fun!



30.10.13

Remörk live in brussels, oct 24 2013



here's the set i played opening up for Deafheaven.
i came in as a last minute Pharmakon replacement, who was unable to play due to sickness..
too bad, would've loved to see a Pharmakon show.

with not too much time to prepare things, i decided to recycle some old 4track tapes, field recordings and melodies i'd used on previous shows and releases, and to pile some new stuff and improv on top of that.

conclusions of the day:
* murphy was right - prepare all you want.
* i prefer pink over white noise
* singing a Van Morrison song in front of a black metal audience isn't necessarily going to make you a lot of friends.

17.4.13

Condor Gruppe live @ Studio Brussel radio



new band, and a chance to use that Hohner Bass 3. yay!

Pearl Syncussion pt.II: Service Manual!

good news for everyone looking for the SY-1 schematic - a high res scan of the service manual is finally available!
download it here.
the whole thing provided by mister James Wetzel in Chicago, who had the bright idea to simply email the people over at Pearl. now how come no one thought of that before? weird.

James had this to say about the exchange:
 'Funny thing is the guy at pearl that i spoke with on the phone, gene okamoto, was super friendly and said something like "Pearl Syncussion...... Aha, now that's a name I haven't heard in a long, loooooong time." It was like the scene in star wars when obi-wan reacts to luke calling him obi-wan...
(...) and gene seemed to get a kick out of hearing the word "syncussion". '

well, there ya go, james. and gene. syncussion. hehe.

the above is a snippet of an email i got from james to ask for more info on the mods i did..
so i'm considering putting up a better mod guide now i have the service manual. stay tuned!

29.1.13

DD-14 again

hey hey, look what i found tucked away in a remote corner of our vast mansion.. if it isn't the old yamaha DD-14!
blew the dust off and took r for a little spin. first time i tried the MIDI functionality (that crapped out). noticed that CV can also control the foot pedal - hadn't thought of that before.

compared to all the possibilities in this piece of kit, the following recordings are extremely sober.
guess i'm minimal like that, yo.
more to come, i would think.

14.1.13

Pearl Syncussion

some time ago, i scored an SY-1.
on a fleamarket.
i won't anger you with the price.

after using it for a while now,  i must say i love the sound range this thing has - but it lacks a little in the control department.
i guess my main complaint about this thing is that there's two completely independent voices, with seperate triggers, but they get treated like a single entity. for one, their outputs get summed to a mono signal. so no way of processing the voices separately. that's a bummer.
to further that approach, external pitch control also applies to both voices.
and, to top it all off, the only way to control that pitch externally is through a footpedal or potentiometer. not quite the most accurate way there.

and then i came across this video:


where the thing is modded to track CV! now there's an idea. WANT.

so. the search begins.
only schematic to be found is a crummy, hardly readable piece of bluhh.

might as well just open up the case.
first thing i noticed is that ALL jacks used are stereo. good news, since the schematic shows that both voices get summed all the way at the end, using just two resistors. hooray for soon-to-be split stereo!


now, the tune jack is also a stereo one. the tip sends +9v to your footpedal, the ring returns the diminished voltage.
so if you want to run CV into yours, use an insert / stereo to dual mono cable, and use the end that doesn't have a voltage on it, ok? 
upon which you'll probably find much the same as i did - it does repond to external cv, but not quite as one would like. response to both expo and lin seems way out. 
turns out it does track quite consistently, but not 1V/oct - more like 0.4V/oct or something.
a simple voltage divider network (or an attenuator on yr modular) could do wonders here. drop your voltage a little and you should be good to go.

i decided to do that inside of the SY-1, so it not only becomes compatible with other CVstuff, but i also get to use the stereo jack to control both channels independently. i'm never gonna use the footpedal control anyway, so i can safely lose the 9v connection.

here we go:

ta-daaa. nice dual channel CV controls, trimmable to play in tune over about 3 or 4 octaves.
that's more than most drummers.

one option i looked into was changing the feedback resistor on the opamp mixer, but as you can see that would have affected the response for the front panel tune slider, the S&H, LFO and EG. didn't seem like the way to go. i also tried a simple resistor divider at the front end, but this seemed like the more elegant solution.

(EDIT: SCHEMATIC SIMPLIFIED AND IMPROVED.)

only thing left to do was use the stereo output jack in it's intended form - aka NOT mono -
and now i've got a true dual percussion synth. aces.

and although it looks quite easy on paper, i must say the good folks at Pearl really did build this thing like a tank. build quality second to none, with hardly any room left for mods.
glad i managed the lot without having to drill the case..