28.1.12
Norwegian Harvest, Remote Style
The Kunstisizer from Wrap Arts Centre on Vimeo.
this funky performance box is made by the almighty Roar Sletteland, whom i met over at BEK.
it was commissioned by the Wrap Arts Centre, and while i was there it was still in its foetal conceptual stage.
after we were talking about the idea of making an electronic instrument that had a few demands to it
- it had to be simple, because thirty pieces would have to be handmade - anyone would have to be able to play it - portable and standalone - to be integrated on stage in a 'theatre' kind of idea, etc etc - i actually had a very vivid dream about just such an instrument. it was made for two players facing eachother, controlling each other's sound.
normally i'm not the kind of 'it came to me in a dream' kind of person.
so i thought it was hilarious. still, the idea sort of stuck.
so this is my claim to the Most Esoteric Non-Participation Award of 2011.
the concept survived, although it looks quite different than what i subconsciously had envisioned -
and i have no clue as to what is in there, as far as electronics go.
all i know is i'm honoured to have been (a very small) part of this.
and very curious as to what the participants will do with it.
keep you posted!
25.1.12
Casio SA-2 bend/build report
over a year ago, i started bending my Casio SA-2.
never really happy with how it was turning out, it got left in one of many corners somewhere.
recently i picked it up where i'd left it.. here's what happened to it, kinda.
![]() |
| standard issue. pic found on the net. |
![]() |
| the victim. |
| bottom: homemade buttons on tactile miniswitches top: mode select switching array |
| crash electronics |
| insert jack top left |
| tape delay inserted |
| LFO drives LED drives LDR |
![]() |
| new amp, original speaker |
| amp clipping makes the speaker light up. |
| End Result (for now) |
more explanation, notes on bends, mods, amp etc coming soon.
Norwegian Harvest, pt.III: Arne's Stick Of Joy
dug up the footage of the dual oscillator joystick.
my man Arne S. had bought a noysestick on eBay, but the range was totally limited.
we used the oscillator basis and put it in a nicer joystick, which had a lot more buttons as well
aka more options for mods and bends.
since it stayed in norway, this is all from memory..
i think it houses 2 oscillators on a 4093 IC.
(not entirely sure, because i'd expect 4 oscillators then, but ok.)
each osc pitch is on a joystick axis.
your triggerfinger activates one oscillator,
the other has a momentary on/off button as well as an on/off switch.
master volume control slider on the side.
don't really recall what the two pots on the front do, to be honest.
some buttons switch in different caps for different pitch ranges,
some buttons make the two modulate eachother.
some buttons don't do anything at all.
the keyboard is basically an extra resistor ladder that gets spliced into the pitch control of oscillator 1.
keyboard also holds a bend with an led on one of the slider switches, but i have no idea what it hooked to what.
it did sound nasty though.
i'm sure i drew up a schematic while working on it, but (of course) i don't have that here either.
anyway - it's noisy, irritating and obnoxious. just how we like it.
my man Arne S. had bought a noysestick on eBay, but the range was totally limited.
we used the oscillator basis and put it in a nicer joystick, which had a lot more buttons as well
aka more options for mods and bends.
since it stayed in norway, this is all from memory..
i think it houses 2 oscillators on a 4093 IC.
(not entirely sure, because i'd expect 4 oscillators then, but ok.)
each osc pitch is on a joystick axis.
your triggerfinger activates one oscillator,
the other has a momentary on/off button as well as an on/off switch.
master volume control slider on the side.
don't really recall what the two pots on the front do, to be honest.
some buttons switch in different caps for different pitch ranges,
some buttons make the two modulate eachother.
some buttons don't do anything at all.
the keyboard is basically an extra resistor ladder that gets spliced into the pitch control of oscillator 1.
keyboard also holds a bend with an led on one of the slider switches, but i have no idea what it hooked to what.
it did sound nasty though.
i'm sure i drew up a schematic while working on it, but (of course) i don't have that here either.
anyway - it's noisy, irritating and obnoxious. just how we like it.
5.12.11
Rehousing the Gristleizer pt.ll / MV-53
on the left: the Gristleizer.
on the right: the Molten Voltage MV-53 tap tempo circuit.
neat little LFO thing, does 4 different waveforms in 4 different divisions with swing. straight and inverted outputs.
rate controlled by pot or by tapping along with yer tempo.
divisions meaning: same as tapped/dialled, double time, triple time, quadruple time.
waveforms square, sine, ramp up/down.
0-9v in theory, although the 0v is never really 0volts.
don't know if that's just my build.
the sliders set the floor and ceiling anywhere between those two, so there's a lot of options there. was controlling the MS-20 filters earlier.. mindblowing.
9 user programmable presets to create your own sequences.
16 steps max. each, combining the 16 options - allowing you to program rhythmical LFO patterns.
all sounds truly promising, dunnit?
only downside i noticed is that in between the two taps that determine the tempo, the LFO flatlines.
which makes it a neat studio tool, rhythm LFO box or even master clock, but it makes me reluctant to take it on stage. i don't want to lose a pulse or rhythm sequence halfway through a tune because i need to adjust it to a running drummer.. which, in all fairness, is more than half of the cases in which you need a tapped tempo.
anyway, still promises to be hours of fun.
especially the complex rhythm patterns are something you'd normally look at software for, haven't seen that around too often.
next up, unfortunately, would be a tap tempo button that actually keeps running and adjusts to the new tempo.. like the overenthousiastic drummer it needs to follow.
29.11.11
Korg MS-20 pix
between the two VCO's is the sync switc.
on the VCA 'panel' is the EG2 switch and the VCA pot.
would like a matching knob for that one..
where the grey stage tape is, is where the old holes are. temporary fix, no doubt.
(lots of space inside, need to come up with extra goodies to fill those holes.)
new jacks are located in a more convenient spot.
not that i'm using them in the picture, but i could.
Korg MS-20 mods/schematics
okay, so i got hold of the schematics and board layouts here.
if you want to reproduce some of these mods, you'll need them, as i already screwed the bugger back together, so no handy step-by-step pix.
EDIT: HERE'S SOME NICE WORK ON THE NEWER MS-20 MINI!
1. patching out the VCO's.
this is easy - just tap into the right points on the waveform selector switches.
as you can see, the white noise on VCO1 is the same white noise source that's on the patch bay, so to me there's no real use in having that twice.
VCO2 is a little more difficult to read, but ok.
the bottom throw i highlighted is the straight saw signal. easy.
next: IC6 turns that saw into a square or pulse wave, depending on the state of its non-inverting input.
as you can see, the second pole of the selector switch connects that input either to ground or not. when connected, you get a square wave - if not, pulse. that's why the square and pulse waveforms are on the same point, aka the output of the opamp.
therefore it is impossible to tap into a square and a pulse wave at the same time here - the same opamp is responsible for both, and it can only do one or the other. it's basically a hardwired version of the PW pot on VCO1.
the four logic gates on the bottom here are your ring modulator (there's an error in this factory schematic!), and the output goes from R65/66/67 straight to the top throw of the selector switch.
notice that the square/pulse from VCO2 gets used to drive the ring modulator through D8 -
the second pole turns the pulse wave into a square wave when on the Ring setting.
however, the ring gets fed the pulse wave (same opamp output) when in pulse or saw mode as mentioned in my previous post. so out the jack comes.
+++
listening to the waveforms on the new jacks, i noticed the volume drops if the same waveform is selected as the VCO out to run through the internal filters. (listening to saw out patchpoint with saw selected on VCO, for example.)
i might want to buffer them, but for now, it doesn't really bother me.
might depend on the circuit they get patched into, though.
2. sync switch
hard sync is not all that hard to implement.
you need to reset one VCO (slave, preferably the one with the higher pitch, so VCO2) with every cycle of the other VCO (master, here VCO1).
the trick is around D4 and D7.
in this case, you want to pretend that D4 (VCO1) is attached to Q10 and Q11 (VCO2), overriding D7.
you cant't just make that connection, because D7 will then also override D4, and that's no good.
so we throw in a fake D4 substitute.
a wise man on a nice forum mentioned that it would be best to use shielded wires and connect the shields to ground to avoid the oscillators locking when their frequencies are close. you run the risk of them syncing through stray wire capacitance even when the switch is not engaged.
i took his advice - never even tried otherwise, but it works beautifully.
3. EG2 to VCA switch
this, to me, is a big one. i feel it expanded the possibilities of the synth a lot.
slightly edited schematic:
there's a length of wire conveniently running across the board, connecting the EG2 output to the VCA in.
i believe it's labeled 'No.4', but don't quote me on that - anyway, it connects to R125.
if you snip that wire and put in a switch, you can now defeat EG2 control of the VCA.
i also put an extra jack on the side of the EG, as an EG2 0-5v output.
of course, you need to plug some other voltage source into the 'initial gain' to open the VCA, or else it'll be dead silent. but at least now you can choose whether or not you want EG2 in the CV mix!
4. VCA floor pot
since i felt it was a bit of a waste to always plug something (mostly the mod wheel) in the initial gain jack, i decided to hardwire a mod wheel duplicate into an initial gain duplicate, freeing both the input and the mod wheel up for other uses.
it was almost as easy as copy/pasting, except that i didn't need the negative voltages of the mod wheel.
i kind of hustled the schematic around a little, to show what i copied.
i left out the new EG2 jack for clarity.
everything still connects to the same spot, the CV mix node.
i copied the initial gain input (diode + 1M pulldown), and one half of the mod wheel.
this way, the initial gain jack, EG2 and the floor pot all play together nicely.
you can modulate through the initial gain jack, on top of a floor pot drone that'll last until the wall runs out of juice.
if you ever think of offering this mod to people, some credit would be nice.
if you want to reproduce some of these mods, you'll need them, as i already screwed the bugger back together, so no handy step-by-step pix.
EDIT: HERE'S SOME NICE WORK ON THE NEWER MS-20 MINI!
1. patching out the VCO's.
this is easy - just tap into the right points on the waveform selector switches.
as you can see, the white noise on VCO1 is the same white noise source that's on the patch bay, so to me there's no real use in having that twice.
VCO2 is a little more difficult to read, but ok.
the bottom throw i highlighted is the straight saw signal. easy.
next: IC6 turns that saw into a square or pulse wave, depending on the state of its non-inverting input.
as you can see, the second pole of the selector switch connects that input either to ground or not. when connected, you get a square wave - if not, pulse. that's why the square and pulse waveforms are on the same point, aka the output of the opamp.
therefore it is impossible to tap into a square and a pulse wave at the same time here - the same opamp is responsible for both, and it can only do one or the other. it's basically a hardwired version of the PW pot on VCO1.
the four logic gates on the bottom here are your ring modulator (there's an error in this factory schematic!), and the output goes from R65/66/67 straight to the top throw of the selector switch.
notice that the square/pulse from VCO2 gets used to drive the ring modulator through D8 -
the second pole turns the pulse wave into a square wave when on the Ring setting.
however, the ring gets fed the pulse wave (same opamp output) when in pulse or saw mode as mentioned in my previous post. so out the jack comes.
+++
listening to the waveforms on the new jacks, i noticed the volume drops if the same waveform is selected as the VCO out to run through the internal filters. (listening to saw out patchpoint with saw selected on VCO, for example.)
i might want to buffer them, but for now, it doesn't really bother me.
might depend on the circuit they get patched into, though.
2. sync switch
hard sync is not all that hard to implement.
you need to reset one VCO (slave, preferably the one with the higher pitch, so VCO2) with every cycle of the other VCO (master, here VCO1).
the trick is around D4 and D7.
in this case, you want to pretend that D4 (VCO1) is attached to Q10 and Q11 (VCO2), overriding D7.
you cant't just make that connection, because D7 will then also override D4, and that's no good.
so we throw in a fake D4 substitute.
a wise man on a nice forum mentioned that it would be best to use shielded wires and connect the shields to ground to avoid the oscillators locking when their frequencies are close. you run the risk of them syncing through stray wire capacitance even when the switch is not engaged.
i took his advice - never even tried otherwise, but it works beautifully.
3. EG2 to VCA switch
this, to me, is a big one. i feel it expanded the possibilities of the synth a lot.
slightly edited schematic:
there's a length of wire conveniently running across the board, connecting the EG2 output to the VCA in.
i believe it's labeled 'No.4', but don't quote me on that - anyway, it connects to R125.
if you snip that wire and put in a switch, you can now defeat EG2 control of the VCA.
i also put an extra jack on the side of the EG, as an EG2 0-5v output.
of course, you need to plug some other voltage source into the 'initial gain' to open the VCA, or else it'll be dead silent. but at least now you can choose whether or not you want EG2 in the CV mix!
4. VCA floor pot
since i felt it was a bit of a waste to always plug something (mostly the mod wheel) in the initial gain jack, i decided to hardwire a mod wheel duplicate into an initial gain duplicate, freeing both the input and the mod wheel up for other uses.
it was almost as easy as copy/pasting, except that i didn't need the negative voltages of the mod wheel.
i kind of hustled the schematic around a little, to show what i copied.
i left out the new EG2 jack for clarity.
everything still connects to the same spot, the CV mix node.
i copied the initial gain input (diode + 1M pulldown), and one half of the mod wheel.
this way, the initial gain jack, EG2 and the floor pot all play together nicely.
you can modulate through the initial gain jack, on top of a floor pot drone that'll last until the wall runs out of juice.
if you ever think of offering this mod to people, some credit would be nice.
23.11.11
Korg MS-20
i was getting jealous of the great sounds Wieter gets out of his MS-10.
so i went over the hurdle and bought me an MS-20, hah!
the thing sounds fucking unbelievable..
got it relatively cheap, compared to today's prices - because it had mods done to it (aka extra holes in the top), and i also got a small refund because the Ring Mod wasn't working.
insert new 4011, and voila: full working order!
some genius had decided to bring out all OSC1 waveforms, to make the output patchable.
great idea, if you drill the holes on the Right Hand Side over by the bay, dumbass.
played around with it for a while, and started thinking about what i would like to add, featurewise (hey, it already has holes in it.)
VCO1:
- i'm keeping the tri/saw/square outs.
- do away with the noise (that's on the patchbay anyway)
- and i'll be adding PWM instead.
VCO2:
- i'll go with three jacks: saw, square/pulse and ring mod out.
square and pulse are on the same point.
the ring mod uses the PW wave of osc1 against the square wave of osc2, but if you switch to saw or pulse on osc2, it gets fed the pulse wave instead of the square. so bringing out the ring mod would offer even slightly more tonal options.
- thinking of a Sync switch, using VCO2 as slave.
VCA:
- already added a VCA floor on a pot.
this is basically a hardwired implementation of the 'initial gain' patch, just leaves both the mod wheel and the initial gain jack free for extra modulation.
- putting EG2 on a switch, so i can defeat EG2 and just use the floor pot.
VCA modulation all you want through the init. gain jack, WITHOUT EG2 interfering!
- EG2 gets a jack out. it's the line controlling the VCA, aka the 0-5v envelope. could be useful.
when all that is done, i need me a voltage mixer..
pix soon.
so i went over the hurdle and bought me an MS-20, hah!
the thing sounds fucking unbelievable..
got it relatively cheap, compared to today's prices - because it had mods done to it (aka extra holes in the top), and i also got a small refund because the Ring Mod wasn't working.
insert new 4011, and voila: full working order!
some genius had decided to bring out all OSC1 waveforms, to make the output patchable.
great idea, if you drill the holes on the Right Hand Side over by the bay, dumbass.
played around with it for a while, and started thinking about what i would like to add, featurewise (hey, it already has holes in it.)
VCO1:
- i'm keeping the tri/saw/square outs.
- do away with the noise (that's on the patchbay anyway)
- and i'll be adding PWM instead.
VCO2:
- i'll go with three jacks: saw, square/pulse and ring mod out.
square and pulse are on the same point.
the ring mod uses the PW wave of osc1 against the square wave of osc2, but if you switch to saw or pulse on osc2, it gets fed the pulse wave instead of the square. so bringing out the ring mod would offer even slightly more tonal options.
- thinking of a Sync switch, using VCO2 as slave.
VCA:
- already added a VCA floor on a pot.
this is basically a hardwired implementation of the 'initial gain' patch, just leaves both the mod wheel and the initial gain jack free for extra modulation.
- putting EG2 on a switch, so i can defeat EG2 and just use the floor pot.
VCA modulation all you want through the init. gain jack, WITHOUT EG2 interfering!
- EG2 gets a jack out. it's the line controlling the VCA, aka the 0-5v envelope. could be useful.
when all that is done, i need me a voltage mixer..
pix soon.
Subscribe to:
Posts (Atom)







